Gutter guard installationSydney
If you are clearing the same gutters every few months, a properly fitted mesh guard ends the cycle. Leaves slide or blow off, water goes through, and your gutters and downpipes stay clear.
- Aluminium and steel mesh, colour matched to the roof
- Fitted from the roof to the gutter edge, no gaps
- Non-combustible options for bushfire-prone land
How gutter guard works
The systems we fit use a fine metal mesh that runs from under the second row of tiles, or is fixed to the roof sheet with matching saddles, down to the outer lip of the gutter. That creates a continuous slope with no shelf for leaves to sit on. Rain passes through; leaves dry out and blow away.
Cheap plastic inserts and brush-style products sit inside the gutter and tend to trap debris rather than shed it. We do not install them.
Choosing the right mesh
Aluminium mesh suits most tile and Colorbond roofs and will not rust. Steel mesh is stronger and is used where possums, birds or heavy branch fall are a problem. Aperture matters as well: finer mesh keeps out pine needles, jacaranda and casuarina litter that standard mesh lets through.
On bushfire-prone land, gutter guard must be non-combustible. Metal mesh with a small aperture helps stop embers lodging in dry litter, which is one of the ways houses ignite during a bushfire. Tell us your BAL rating if you have one and we will quote a compliant product.
Before the guard goes on
Gutters and downpipes are cleaned out first, and any leaks or sagging are repaired, because there is no point sealing a problem under mesh. See gutter cleaning and leak repairs.
What does gutter guard installation cost?
| Job | Guide price (inc. GST) |
|---|---|
| Gutter guard supplied and installed | $25 – $55 per metre |
| Typical single-storey house | $1,000 – $2,500 |
| Gutter clean before installation | $150 – $350 |
Indicative Sydney ranges only. Your quote is a fixed price based on your property. Full details in the gutter repair cost guide.
From first message to finished gutter
No sales visit and no vague hourly rates. You know the price before anyone climbs a ladder.
Send the details
Use the quote form. A sentence about the problem and your suburb is enough to start.
Get a fixed price
Simple jobs are quoted from your description and photos. Larger ones get an on-site measure.
Work is booked in
Pick a day that suits. Urgent leaks are made safe first, then repaired properly.
Checked and cleaned up
Gutters are water tested, old materials are taken away and you get photos of the finished job.
Gutter guard installation: common questions
Does gutter guard really work?
A quality metal mesh fitted to the roof line works well and greatly reduces cleaning. No product is completely maintenance free: fine dust and small seeds can build up over years, so an occasional rinse or brush-off is still worthwhile.
How much does gutter guard cost in Sydney?
Installed metal mesh gutter guard generally costs $25 – $55 per metre, depending on roof type, mesh grade, height and access. A typical single-storey home comes to roughly $1,000 to $2,500.
Will gutter guard affect my roof warranty or rainwater tank?
Correctly installed mesh does not void roofing warranties when compatible materials and fixings are used. Aluminium and Colorbond steel mesh are suitable for rainwater harvesting.
Can gutter guard be fitted to a tile roof?
Yes. On tile roofs the mesh is tucked under the second course of tiles and fixed to the gutter lip with a trim, so no tiles are drilled.
Gutter guard installation across Sydney
Available in every region we cover. Choose your area for local information.
Ready for a fixed-price gutter quote?
It takes about a minute, and there is no obligation.