Gutter repair cost Sydney
Small gutter repairs in Sydney typically cost $150 – $350. Full replacement in Colorbond runs about $45 – $70 per metre installed, or $2,000 – $4,000 for a typical single-storey house. Here is what drives the price.
Sydney gutter price guide
All prices are in Australian dollars including GST and are indicative. They are drawn from published NSW cost guides and are meant to help you judge whether a quote is reasonable, not to replace one.
| Job | Basis | Typical range |
|---|---|---|
| Reseal a leaking joint, corner or stop end | Per repair | $150 – $350 |
| Refix or realign a sagging gutter (new brackets, corrected fall) | Per run | $200 – $500 |
| Replace a damaged or rusted section (up to about 6 m) | Per section | $350 – $800 |
| Full gutter replacement, Colorbond or Zincalume | Supplied and installed | $45 – $70 per metre |
| Typical single-storey house, all gutters | Whole house | $2,000 – $4,000 |
| Typical two-storey house, all gutters (includes height access) | Whole house | $3,500 – $6,500 |
| Downpipe replacement | Supplied and installed | $150 – $350 each |
| Gutter guard, metal mesh | Supplied and installed | $25 – $55 per metre |
| Gutter and downpipe clean, single storey | Per house | $150 – $350 |
| Gutter and downpipe clean, two storey | Per house | $250 – $550 |
| Box gutter repair or reline | Per gutter | $800 – $3,000 |
| Fascia repair or metal fascia cover | Supplied and installed | $40 – $90 per metre |
| Urgent storm make-safe visit | Per visit | $250 – $450 |
What changes the price of a gutter repair
Height and access
This is the biggest variable. Single-storey gutters can be reached from a ladder or a small platform. Two-storey work needs scaffolding, an elevated work platform or roof anchors, which is why whole-house replacement on two storeys costs about $3,500 – $6,500 compared with $2,000 – $4,000 for one storey.
How much gutter is involved
Replacing a short section costs more per metre than a full run because the visit and set-up are spread over less gutter. If two or three sections on one side have failed, replacing the whole run is often similar money and gives a better result.
Profile and material
Standard quad in Zincalume is the cheapest. Colorbond adds a little, and ogee, half round and larger commercial profiles cost more again. Coastal homes that need marine-grade steel pay a premium for the material.
What is behind the gutter
Rotten fascia has to be repaired before new brackets will hold. Fascia work is typically $40 – $90 per metre. Eaves linings on older homes may contain asbestos, which requires a licensed removalist.
Roof type and pitch
Steep roofs, brittle terracotta tiles and slate slow the job down and can need extra safety measures.
Repair or replace: where the money goes further
A repair at $150 – $350 is clearly worth it on a gutter with years left in it. If the same run needs repeated visits, or rust is widespread, put that money toward replacement instead. Read the repair or replace guide for the signs to look for.
What a fair quote should show
- The length and profile of gutter being repaired or replaced, and the material.
- Downpipes, fascia work and access equipment as separate lines.
- Removal and disposal of old materials.
- For work over $5,000 including GST, the contractor's NSW licence number and a written contract.
- For work over $20,000, Home Building Compensation cover.
Cost questions
How much does gutter repair cost in Sydney?
Most small repair visits are quoted at around $150 – $350 for one or two fixes such as a leaking joint or loose brackets. Replacing a damaged section is typically $350 – $800. Height, access and the condition of the gutter all move the price, which is why every job is quoted individually as a fixed price.
How much does gutter replacement cost in Sydney?
Published NSW guides put Colorbond gutter at about $45 – $70 per metre installed. A full replacement on a single-storey home is commonly $2,000 – $4,000, and $3,500 – $6,500 for a two-storey home. Downpipes, fascia repairs and scaffolding are usually itemised separately.
How much does gutter guard cost to install?
Metal mesh gutter guard is generally quoted at $25 – $55 per metre installed, depending on roof type, mesh grade and height. Foam and brush inserts are cheaper but trap debris and are not suitable for bushfire-prone areas.
How much does gutter cleaning cost in Sydney?
Expect roughly $150 – $350 for a single-storey home and $250 – $550 for two storeys. Heavily blocked gutters, steep roofs and blocked downpipes add to the price.
Is it cheaper to repair or replace gutters?
Repair is cheaper when the problem is isolated: a leaking joint, a few loose brackets or one rusted section. Once rust has spread along most of a run, or the same gutter keeps needing repairs, replacement usually gives better value over a few years.
Related: gutter replacement, leaking gutter repair, gutter guard installation, gutter cleaning.
Want an exact price for your gutters?
It takes about a minute, and there is no obligation.